3″ TINY HOUSE Small Stove Installation Kit – METAL Roof Exit BUNDLE

This kit is for venting 3” stoves like The Dwarf 3kw LITE (pre-2019 models), Cubic-Mini Cub & Grizzly and the Pipsqueak, through the metal or rubber roof of a tiny house, shed or small cabin.  If you have a shingle or rubber roof, use the 3″ Shingle Roof Kit instead. For more steeply pitched roofs, use the Extreme Angle Pipe Boot instead of the standard one included in this kit.

Since every installation is a little bit different you will need additional single wall pipe and may need additional double-wall pipe to complete your installation.  Use our flue parts calculator to help figure out how much extra pipe you need in addition to the kit. Code for residential installation says, “ 3 ft minimum from roof penetration and 2 ft minimum above highest point of anything within 10 ft.”

Note: If using this kit on the Cubic-Mini line of stoves you’ll need to tweak the male end of our pipe to fit the stove or use our Cubic Mini adapter.  See our primer on Cubic Mini flue systems here.

⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.  For more information, visit www.P65Warnings.ca.gov.