4” TINY HOUSE Small Stove Installation Kit – METAL Roof Exit BUNDLE

(4 customer reviews)

$659.00

A roof installation is the easiest, cheapest, and most efficient flue configuration for wood stoves. This 4″ kit comes with the parts you will need to safely get through the shingle roof of your tiny house, shed, or small cabin. Most installs will require a bit more pipe than the 53″ to 58″ of vertical pipe included in the kit. Run your installation measurements through our Flue Parts Calculator to make sure you’ve got everything you need or contact us with any questions.  If you have a shingle roof, use the 4″ Tiny House Shingle Roof Kit instead.

4” TINY HOUSE Small Stove Installation Kits are sold out but we have more on the way!ETA for the full kit is August. Both the 4″ Shielded Roof Vent and the 4″ Interior Trim Plate are on backorder. Need to install sooner? Please email us at support@tinywoodstove.com to discuss options.

4” Roof Support Mounting Bracket

$75.00

In stock (can be backordered)

4″ Insulated Stainless-Steel Chimney Pipe

40"

4" Storm Collar

$30.00

In stock (can be backordered)

6"- 11" Hightemp Silicone Pipe Boot Gasket

$70.00

In stock

4” Shielded Roof Vent

$115.00

Available on backorder

4” Single to Double Adapter

$45.00

In stock (can be backordered)

4" Interior Trim Plate

$40.00

Available on backorder

4” Single-Wall Telescoping Stove Pipe

$60.00

In stock (can be backordered)

4” Double-Wall Pipe Clamp × 2

$22.00 each

In stock (can be backordered)

4” Single-Wall Pipe Clamp

$20.00

In stock

Stove Gasket Cement

$10.00

Available on backorder

SKU: 4"THMetalRoofKit Categories: , Tag:

 

This kit is for venting 4” stoves like The Dwarf 3kW, Dwarf 4kw, Salamander Hobbit, Navigator Cod & Sardine through a metal or rubber roof of a tiny house, shed or small cabin.  If you have a shingle or tile roof, use the 4″ shingle roof kit instead.

 

Note: Since every installation is a little bit different you will need additional single wall pipe and may need additional double-wall pipe to complete your installation.  Use our flue parts calculator to help figure out how much extra pipe you need in addition to the kit.

Code for residential installation says, “ 3 ft minimum from roof penetration and 2 ft minimum above highest point of anything within 10 ft.”

 

⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.  For more information, visit www.P65Warnings.ca.gov.

 

Weight 1 oz

4” Roof Support Mounting Bracket

Weight 55 oz
Dimensions 6.5 × 9 × 9 in

4″ Insulated Stainless-Steel Chimney Pipe

Weight .25 oz
Dimensions N/A
Length

40"

4" Storm Collar

Weight 11 oz
Dimensions 2.5 × 12 × 12 in

6"- 11" Hightemp Silicone Pipe Boot Gasket

Weight 26 oz
Dimensions 5 × 14.5 × 14.5 in

4” Shielded Roof Vent

Weight 45 oz
Dimensions 11.5 × 12 × 13 in

4” Single to Double Adapter

Weight 23 oz
Dimensions 6.5 × 7 × 7.5 in

4" Interior Trim Plate

Weight 29 oz
Dimensions .5 × 12.5 × 18 in

4” Single-Wall Telescoping Stove Pipe

Weight 28 oz
Dimensions 5 × 5 × 14.5 in

4” Double-Wall Pipe Clamp

Weight 10 oz
Dimensions 3.5 × 6.5 × 6.5 in

4” Single-Wall Pipe Clamp

Weight 9 oz
Dimensions 3.5 × 4.5 × 4.5 in

Stove Gasket Cement

Weight 5 oz
Dimensions 8 × 2 × 1.5 in

Share your thoughts!

5 out of 5 stars

4 reviews

Let us know what you think...

0 reviews with a 3-star rating

There are no reviews with a 3-star rating yet

×

Login

Continue as a Guest

Close
Scroll to Top