3″ – 8″ Hightemp Silicone Pipe Boot Shingle Roof Flashing

$70.00

This High-Temp silicone (not EDPM) pipe boot flashing is used for sealing your stove pipe and roof for a perfect water tight seal. Fits our 3″, 4″ and 5″ insulated pipe (5″, 6″, and 7″ outer diameter), and has a 20″x20″ metal base for layering in a shingle or tile roof.  The boot needs to be cut prior to installation so the hole is approximately 20% smaller than the outside diameter of the pipe.

Availability: Available on backorder. ETA June 2021.

SKU: 3-8"Flashing Categories: , ,

Fits Pipe Outside Diameter: 3″ – 8″

Base Dimensions 20″ x 20″

Features a flexible aluminum base for layering under shingle or tile roof applications.

This pipe boot can be used with our 3″ Insulated pipe (5″ outside diameter) with up to a 14/12 roof pitch, and our 4″ and 5″ Insulated Pipe (6″, and 7″ outside diameter, respectively) with up to a 12/12 roof pitch.  Use scissors to cut the hole approximately 20% smaller than the outside diameter of your pipe.

 

⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.  For more information, visit www.P65Warnings.ca.gov.

 

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Continue as a Guest

Close
Scroll to Top