4” TINY HOUSE Small Stove Installation Kit – Wall Exit BUNDLE – ALL INSULATED


For some installations, a wall exit makes the most sense. This kit comes with the parts necessary to exit through your wall.  This version is for flue systems using all insulated pipe with a Dwarf Stove, so all single-wall pieces are omitted.

You will need additional double-wall insulated pipe to complete your installation. We strongly recommend reviewing your design with us by emailing support@tinywoodstove.com before ordering this item.

4" Wall Thimble


In stock (can be backordered)

4" Insulated Tee + Cap


In stock (can be backordered)

4" Insulated Tee Support Bracket


In stock (can be backordered)

4" Adjustable Wall Support Bracket


In stock (can be backordered)

4” Shielded Roof Vent


In stock (can be backordered)

4” Double-Wall Pipe Clamp × 5

$22.00 each

In stock (can be backordered)

4″ Insulated Stainless-Steel Chimney Pipe


Stove Gasket Cement

Used to attach the first section of stovepipe to the flue flange.


High Heat Silicone Sealant

Used to create a watertight seal between the thimble and the insulated pipe.


4” Single to Double Adapter

This adapter allows you to step up from our single wall pipe to double wall insulated pipe. Made from the same high quality stainless-steel as our insulated pipe.

Don’t forget clamps! Every pipe joint needs to be secured with either a clamp or three stovepipe screws. We recommend ordering a pipe clamp along with each section of flue pipe. The Single to Double Adapter will use a Single Wall Clamp on the bottom and a Double Wall Clamp on the top.


In stock (can be backordered)

Available on backorder

SKU: 4"THWallKit-ALL-INSULATED Categories: ,

We have taken the guesswork out of small stove installations and sourced and pieced together complete kits with components that are rated for the high heat of wood-burning stoves and designed to work with your space.


Note: Since every installation is a little bit different you will need an additional single wall pipe and additional double-wall pipe to complete your installation. The kits components get you everything you need to exit the wall minus the single-wall runs of pipe inside the structure and the double-wall insulated runs of pipe outside the structure.  Use our flue parts calculator to help figure out how much extra pipe you need in addition to the kit.


If you need assistance with calculating how much pipe you need, contact us with your plans and the dimension of your space.


⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.  For more information, visit www.P65Warnings.ca.gov.


Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.



Continue as a Guest

Scroll to Top