3″ Cubic Mini Stove Adapter

$35.00

This adapter gives you a proper connection from Cubic Mini flue flange or Cubic Mini’s double-wall pipe to a standard 3″ single-wall pipe.  It can be used to connect a Cubic Mini stove to our standard 3″ single-wall pipe, or to connect the top of Cubic Mini’s double-wall pipe to the single-to-double adapter in our 3″ roof installation kits.

Don’t forget clamps! Every pipe joint needs to be secured with either a clamp or three stovepipe screws. We recommend ordering a pipe clamp along with each section of flue pipe.

Not sure which parts you need?  Check out our primer on Cubic Mini Flue Systems or contact us for help.

Availability: In stock

SKU: CubicADAPTER Category:

The Cubic Mini Grizzly and Cub have an oddly sized flue flange that is slightly smaller than a standard 3″ pipe. This adapter connects to the inside of the flue flange (or the Cubic Mini Pipe) then properly connects to our 3″ single-wall pipe pipe.

Cubic Mini’s stovepipe is non-insulated double-wall, so it’s not ideal for passing through combustibles.  To use our 3″ insulated pipe to install your Cubic Mini safely, you’ll need to adapt from the Cubic Mini flange to a standard 3″ size.  You can use this adapter to connect the Cubic Mini flange to the 3″ single-wall pipe in one of our 3″ roof exit kits, or use it to adapt the top of Cubic Mini’s double-wall pipe to our single-to-double adapter.

Made of carbon steel and painted with black high-temp paint.  A previous version of this part fit the Cubic Mini flue flange but not the Cubic Mini pipe.  The current version of our Cubic Mini adapter fits either one.

 

⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.  For more information, visit www.P65Warnings.ca.gov.

 

Share your thoughts!

Let us know what you think...

What others are saying

  1. Question

    Kevin

    Does it fit in or over the collar on the stove?

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Question

    Cole

    I have a stove with a 3″ OD collar and I’m trying to connect it to a cubic mini pipe. Will this work for that?

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Dan

      Dan

      Thanks for the question, Cole. No, this part will not work for that. Our Cubic Mini Adapter is designed to connect a Cubic Mini to a standard 3″ flue system. It will not connect a standard 3″ stove to a Cubic Mini flue system.

      Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Continue as a Guest

Close
Scroll to Top