This little Heat Fan is for use on freestanding wood stoves with a surface temperature between 230°F – 650°F. With no electricity required the heat fan is an economical way to move your wood stoves heat throughout your living space. This off-grid device can increase the efficiency of your stove which means less fuel and less emissions.
HEAT FAN SPECS
Dimensions: H8.25” x W5” x D4”
Max Output: 180 CFM (Cubic Feet per Minute)
Start Up Temp: 150
- Turns on and off automatically depending on the temperature of your stove.
- Safety spring lifts fan away from stove if temperatures get too hot.
- Whisper quiet operation
- Low startup temps
HOW DOES THE FAN WORK?
Heat Fans use thermoelectric technology to convert a temperature difference into electricity. At the center of the fan is a thermoelectric module. The design creates a hot side and a cold side on the module and when this happens, a principle called the “Seebeck Effect” causes electrons to flow within the module and electricity is generated to operate the fan!
⚠ Warning: California Proposition 65
Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.