.5mm Stainless Steel 316 Inner Wall / Stainless Steel 304 Outer.
This roof vent fits directly on top of our 3″ double-wall insulated pipe with no adapter needed. Secure to our insulated pipe with a double-wall clamp.
⚠ Warning: California Proposition 65
Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Question
Eric (verified owner) –
I have 2 questions:
1) Can this be secured to the double wall pipe with small self-tapping screws, or do I NEED to use your clamps?
2) Can I leave this on while driving at highway speeds assuming it is properly secured?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Cody Hennigan –
Eric-
While it’s possible to attach the roof vent with self-tapping screws, we recommend using our clamps on exterior pipe to avoid any points where moisture can get into the flue system. Using screws on the single-wall pipe inside a structure doesn’t present an issue.
We do not recommend traveling with the roof vent on and instead recommend a driving cap so you can have a detachable chimney
If you have further questions or would like to discuss this in more detail, please email us at support@tinywoodstove.com
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal