4” Stove Pipe 45 Degree Elbow


4″ Black stove pipe 45 degree elbow. Two of these fittings can be used as an off-set to direct pipe away from the stove in situations where your flue does not exit directly above your stove.

Don’t forget clamps! Every pipe joint needs to be secured with either a clamp or three stovepipe screws. We recommend ordering a pipe clamp along with each section of flue pipe.

Availability: In stock (can be backordered)

SKU: 4"SW45 Category:

Made of 0.64 mm (22 gauge) carbon steel with welded seamless construction. Painted with black high-temp paint.

Connecting two 4″ 45-degree elbows in series will offset your pipe by approximately 4.4″. Add additional single wall pipe between the elbows to achieve the needed offset. See the chart in the product photo gallery for more details to help you with your design or email us at support@tinywoodstove.com and we are happy to help.


⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.  For more information, visit www.P65Warnings.ca.gov.


Share your thoughts!

Let us know what you think...

What others are saying

  1. Question


    Is it safe to use two 4 inch, “single-wall”, 45º elbows in order to offset a pipe for a dwarf 3kw standard stove?

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...



Continue as a Guest

Scroll to Top