4” 90 Degree Elbow

$45.00

This fitting changes the direction of your stovepipe by 90 degrees. One end is male (crimped) and the other female.

If you need a part to connect to the rear exit of your stove, don’t use a 90.  Use the rear exit kit instead.

Don’t forget clamps! Every pipe joint needs to be secured with either a clamp or three stovepipe screws. We recommend ordering a pipe clamp along with each section of flue pipe.

Availability: Sold out, but more on the way! ETA August 2022 (Asparagus)

Made of 0.64 mm (22 gauge) carbon steel with welded seamless construction. Painted with black high-temp paint.

 

⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.  For more information, visit www.P65Warnings.ca.gov.

 

Weight 22 oz
Dimensions 5 × 9.5 × 9.5 in

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Continue as a Guest

Close
Scroll to Top