4″ Stove Rear Exit Kit

$65.00

The rear exit kit allows you to use the rear exit of your Dwarf 3kW Standard, Dwarf 4kw, Salamander Hobbit, or other 4″ stove with an available rear exit. Using the Dwarf or Hobbit’s rear exit keeps the stove top free for use as a cooking surface. The bottom of the tee also makes an easy clean-out for the flue.

Don’t forget clamps! Each section of pipe needs to be secured with either a Single Wall Pipe Clamp or three self-tapping stovepipe screws. We recommend ordering two clamps with the rear exit kit: one to secure the cap, one to connect the tee to the next section of pipe. Using clamps rather than screws will make removing the cap to clean the pipe easier.

Availability: In stock (can be backordered)

SKU: 4"RearExit Category:

Made of 0.64 mm (22 gauge) carbon steel with welded seamless construction. Painted with black high-temp paint.

Kit Includes:

  • 4″ T – Fitting
  • 4″ Clean-out Cap

Tee comes approximately 6.5″ off the back of the stove

Clearance from combustibles on single-wall pipe = 18″
(This can be reduced by 66% with a heat shield)

If you are using this part to install a Petit Godin stove with a 4″ flue system, you’ll need to cut the male end off the leg of the tee.  The Petit Godin uses a male 4″ flue flange instead of the typical female flue flange.  Use an angle grinder to remove the male crimp up to the shoulder, and install with stove cement on the inside of the pipe and the outside of the flange, instead of vice-versa.

 

⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.  For more information, visit www.P65Warnings.ca.gov.

 

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Continue as a Guest

Close
Scroll to Top