MightyVent 5″ UL Double Wall Elbow Kit – 30 Degree

$340.00

The MightyVent AF 5″ 30° elbow kit steps your chimney around rafters, beams, ridges and eaves, then back to vertical. It’s built like the rest of your MightyVent 5″ system and includes everything for one offset.

  • Two elbows, one offset. Two 30-degree turns move the chimney sideways and return it to vertical.
  • Fully insulated. 304 stainless walls with 1.18″ of ceramic fiber all the way through the bend.
  • Twist-lock and clamp. The top twist-locks in one turn, and the included clamps lock each joint.
  • Strap included. The stainless elbow strap ties the offset to nearby framing.
  • Sized to fit. MightyVent 5″ insulated pipe (5″ ID, 7.28″ OD).

30 degrees is the maximum elbow angle allowed in a chimney. For 45 and 90 degree bends, use our single-wall connector pipe.

*** Limited Availability: Initial stock of the new UL parts line is limited, so it’s currently only available if you’re purchasing a Dwarf Stove. Use another brand of stove with 5″ pipe? Let us know, and we’ll follow up when more is available. Already purchased a Dwarf Stove and need parts? Contact us and we’ll help you get set up. ***

Sold out, but more on the way! ETA late November 2026

SKU: 5AF-EL-30 Category:

Description

What an elbow kit does

A pair of 30° elbows shifts the chimney sideways so it can step around a rafter, beam or other obstruction and then continue straight up. Add pipe between the elbows for a bigger offset.

What makes MightyVent different

  • Fully insulated bend. Ceramic fiber surrounds the flue through the bend, just like the straight pipe.
  • Aim the offset. The bottom end of each elbow has no twist-lock teeth, so you can turn it to aim the offset before you clamp it.
  • Everything for one offset. Two elbows, a clamp for each and a 304 stainless elbow strap.
  • UL listed. Part of the MightyVent UL 103 Type HT chimney system.

Specifications

  • Angle: 30°
  • Includes: 2 insulated 30° elbows, 2 clamps, 1 MightyVent 5″ Elbow Strap
  • Fits: MightyVent 5″ insulated pipe, 5″ ID / 7.28″ OD
  • Elbow height: 8.57″
  • Elbow body: 7.28″; overall width 9.04″
  • Walls: 304 stainless steel, 0.019″ thick, with a polished finish on the outside
  • Insulation: 1.18″ ceramic fiber
  • Connection: 6-tooth twist-lock top; plain (toothless) bottom end held by the clamp
  • Elbow strap: polished 304 stainless; arms 23.62″ × 2″; band 7.24″ ID
  • Listing: part of the MightyVent UL 103 Type HT chimney system
  • Clearance: 2″ to combustibles

How much offset you get

Join the elbows directly, or add MightyVent 5″ pipe between them for a bigger offset. Figures are from the MightyVent installation manual and can vary by up to 1″, so always check dimensions on site.

Pipe between elbows Offset Rise
0 (elbows joined) 1.5″ 13″
10″ 6.5″ 21.75″
15″ 9″ 26″
20″ 11.5″ 30.5″
15″ + 15″ 16″ 38″
30″ 16.5″ 39″
40″ 21.5″ 47.75″

Use no more than two offsets (four elbows) per chimney and no more than two pipe sections between elbows, up to 48″ total, which covers every offset in the table. With two sections between the elbows, add a second MightyVent 5″ Elbow Strap (sold separately) at the joint between them. Strap the upper elbow to framing before adding more pipe.

 

⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Share your thoughts!

Let us know what you think…

What others are saying

There are no contributions yet.

×

Login

Continue as a Guest