3 Inch 45 Degree Elbow

3" 45 degree elbow measurements

3” Stove Pipe 45 Degree Elbow

$35.00

3″ Black stove pipe 45 degree elbow. Two of these fittings can be used to direct pipe away from the stove in situations where your flue does not exit directly above your stove.

Don’t forget clamps! Every pipe joint needs to be secured with either a clamp or three stovepipe screws. We recommend ordering a pipe clamp along with each section of flue pipe.

Availability: Sold out, but more on the way! ETA January 2023 (Broccoli)

SKU: 3"SW45 Category: 3" FLUE PARTS Tag: Broccoli - Parts Backorder - ETA 1/23

Made of thick 0.64 mm (22 gauge) carbon steel with welded seamless construction. Painted with black high-temp paint.

Connecting two 3″ 45-degree elbows in series will offset your pipe by approximately 4″. Add additional single wall pie between the elbows to achieve the needed offset.

⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Weight	16 oz
Dimensions	6 × 8 × 10 in

Close