3″ TINY HOUSE Small Stove Installation Kit – SHINGLE Roof Exit BUNDLE

$603.00

A roof installation is the easiest, cheapest, and most efficient flue configuration for wood stoves. This 3″ kit comes with most of the parts you will need to safely get through the shingle roof of your tiny house, shed, or small cabin. Most installs will require a bit more pipe than the 33″ to 38″ of vertical pipe included in the kit. Run your installation measurements through our Flue Parts Calculator to make sure you’ve got everything you need or contact us with any questions. If you have a metal or rubber roof, use the 3″ Tiny House Metal Roof Kit instead.

3” Roof Support Mounting Bracket

$70.00

Only 1 left in stock (can be backordered)

3″ Insulated Stainless-Steel Flue Pipe

40"

3" Storm Collar

$25.00

Available on backorder

3" - 8" Hightemp Silicone Pipe Boot Shingle Roof Flashing

$70.00

In stock

3” Shielded Roof Vent

$110.00

In stock (can be backordered)

3” Single to Double Adapter

$40.00

Only 5 left in stock (can be backordered)

3" Interior Trim Plate

$35.00

Available on backorder

3” Single-Wall Telescoping Stove Pipe

$55.00

Available on backorder

3” Double-Wall Pipe Clamp × 2

$20.00 each

In stock

3” Single-Wall Pipe Clamp

$18.00

In stock (can be backordered)

Stove Gasket Cement

$10.00

Available on backorder

SKU: 3"THShingleRoofKit Categories: ,

This kit is for venting 3” stoves like: The Dwarf 3kw LITE (pre-2019 models), Cubic-Mini Cub & Grizzly and the Pipsqueak, through the shingle roof of a tiny house, shed or small cabin.  If you have a metal or rubber roof, use the 3″ metal roof kit instead.

Note: If using this kit on the Cubic-Mini line of stoves you’ll need to tweak the male end of our pipe to fit the stove or use our Cubic Mini adapter.  See our primer on Cubic Mini flue systems here.

Note: Since every installation is a little bit different you will need additional single wall pipe and may need additional double-wall pipe to complete your installation. Use our flue parts calculator to help figure out how much extra pipe you need in addition to the kit.

Code for residential installation says, “ 3 ft minimum from roof penetration and 2 ft minimum above highest point of anything within 10 ft.”

 

⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.  For more information, visit www.P65Warnings.ca.gov.

 

Weight 1 oz

3” Roof Support Mounting Bracket

Weight 54 oz
Dimensions 7 × 9 × 10 in

3″ Insulated Stainless-Steel Flue Pipe

Weight .25 oz
Dimensions N/A
Length

40"

3" Storm Collar

Weight 9 oz
Dimensions 2 × 11 × 11 in

3” Shielded Roof Vent

Weight 38 oz
Dimensions 10 × 10 × 10 in

3” Single to Double Adapter

Weight 19 oz
Dimensions 6 × 6 × 7 in

3" Interior Trim Plate

Weight 28 oz
Dimensions 1 × 12 × 16 in

3” Single-Wall Telescoping Stove Pipe

Weight 23 oz
Dimensions 4 × 4 × 15 in

3” Double-Wall Pipe Clamp

Weight 6 oz
Dimensions 4 × 6 × 6 in

3” Single-Wall Pipe Clamp

Weight 4 oz
Dimensions 4 × 4 × 4 in

Stove Gasket Cement

Weight 5 oz
Dimensions 8 × 2 × 1.5 in

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Continue as a Guest

Close
Scroll to Top