Made from .5mm Stainless Steel 316 Inner Wall / Stainless Steel 304 Outer. Adds approximately 2″-2.5″ to overall flue height.
This adapter is secured to the insulated pipe with a double-wall locking clamp, and the single-wall pipe with a single-wall locking clamp (both sold separately).
⚠ Warning: California Proposition 65
Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Question
Jeremiah Gill –
Is this adapter available with a male crimped bottom and a female top so creosote doesn’t leak out?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dan (verified owner) –
Jeremiah-
Thanks for the question. Yes, that is the configuration of this adapter. The male single-wall end is on the bottom with the inner wall female on the top to prevent creosote or other condensing liquids from leaking out of the pipe. The outer wall of the insulated pipe is male up and female down, which sheds rain water to the outside of the pipe where the chimney is above the roof line.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal