4″ Roof Exit Installation Kit – Shingle Roof, Framed Structure

Designed For

• Dwarf 3kW, Dwarf 3kW LITE, and Dwarf 4kW stoves
• Other wood-burning stoves with 4″ inner diameter flue flange such as Northwoods Woodsman, Salamander Hobbit, Navigator Cod & Sardine
• Compatible with 4” Tiny Wood Stove brand Single-Wall and Double-Wall Insulated pipes
• Works with framed structures such as bunkies, saunas, and hunting cabins
• Suitable for roof exit installations in framed structures with shingle roofs. For metal roofs, use our metal roof installation kit. 

What’s Included

We’ve put together a complete hardware kit using components rated for the high heat of wood-burning stoves and designed to work specifically with roof exit installs in framed structures with shingle roofs. 

This kit includes all components listed above. The kit does NOT contain enough stove/chimney pipe for most installations. Use our Kit Builder Tool to calculate and add the correct pipe lengths for your setup.

What Else You’ll Need

• Stove/Chimney pipe: Add 4” diameter single-wall and double-wall pipe sections using our Kit Builder Tool.
• Basic tools: Screwdriver, ladder, level and/or plumb bob, wax pencil or sharpie, tools to cut a hole in your ceiling/roof, screws to attach your pipe boot to your roof, your roof support bracket to your ceiling or roof, and your ceiling trim plate to your ceiling, silicone or urethane roofing sealant to seal the pipe boot flange to your roof
• You may need: Angle grinder with a metal cutoff blade to cut single-wall pipe, sheet metal crimpers to adjust crimps, high-temp RTV silicone if using a metal flashing or a storm collar, scissors to trim your pipe boot, drill, heat-safe lubricant like spray graphite to prevent stainless hardware from binding
• Hearth protection
• Optional: Heat shielding

Installation Resources

• Installation Guide
• Clearance Requirements and Heat Shields Guide

This kit is DIY-friendly and built for first-timers, but does require some level of comfort using basic tools. That said, always follow local codes and safety best practices. Consult a pro if you’re unsure.

Need Help Planning Your Setup?

Use our Kit Builder Tool or download our Project Planning Checklist to get started. And if you hit a snag, our team is here to help. Email us at support@tinywoodstove.com

⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.  For more information, visit www.P65Warnings.ca.gov.