Sale!

4″ RV / Bus Installation Kit – Roof Exit BUNDLE

(1 customer review)

$436.50

A roof installation is the easiest, cheapest, and most efficient flue configuration for a wood stove in a vehicle. This 4″ kit comes with the parts you will need to safely get through the metal or rubber roof of your RV, bus, van, or other similar structure with a flat or gently sloped roof.  Most installs require a bit more pipe than what comes in the kit. You may want to run your installation measurements through our Flue Parts Calculator to make sure you’ve got everything you need.

Save 10% when buying these parts as a kit! Shop around – you won’t find a more complete kit for Tiny Spaces!

4″ Flue Kits are SOLD OUT.  ETA for the complete kit is January 2022.  If you need to install your stove before then email us at support@tinywoodstove.com for other options.

4” Roof Support Mounting Bracket

$52.20

Available on backorder

4″ Insulated Stainless-Steel Chimney Pipe

20"

4” Single to Double Adapter

$36.00

Available on backorder

4" Interior Trim Plate

$34.20

Available on backorder

4” Single-Wall Telescoping Stove Pipe

$40.50

Available on backorder

4” Double-Wall Pipe Clamp × 2

$14.40 each

Available on backorder

4” Single-Wall Pipe Clamp

$12.60

In stock (can be backordered)

6"- 11" Hightemp Silicone Pipe Boot Gasket

$63.00

In stock (can be backordered)

4” Stainless-Steel Roof Vent

$94.50

Available on backorder

Stove Gasket Cement

$7.20

Available on backorder

 

This kit is for venting 4” stoves like The Dwarf 3kW, Dwarf 4kW, Salamander Hobbit, Navigator Cod & Sardine out the roof of relatively flat roofs (like RV’s & buses).

 

Note: Since every installation is a little bit different you will need additional single wall pipe and may need additional double-wall pipe to complete your installation. Use our flue parts calculator to help figure out how much extra pipe you need in addition to the kit.

 

⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.  For more information, visit www.P65Warnings.ca.gov.

 

Weight 350 oz
Dimensions 14 × 14 × 24 in

4” Roof Support Mounting Bracket

Weight 55 oz
Dimensions 6.5 × 9 × 9 in

4″ Insulated Stainless-Steel Chimney Pipe

Weight .25 oz
Dimensions N/A
Length

20"

4” Single to Double Adapter

Weight 23 oz
Dimensions 6.5 × 7 × 7.5 in

4" Interior Trim Plate

Weight 29 oz
Dimensions .5 × 12.5 × 18 in

4” Single-Wall Telescoping Stove Pipe

Weight 28 oz
Dimensions 5 × 5 × 14.5 in

4” Double-Wall Pipe Clamp

Weight 10 oz
Dimensions 3.5 × 6.5 × 6.5 in

4” Single-Wall Pipe Clamp

Weight 9 oz
Dimensions 3.5 × 4.5 × 4.5 in

6"- 11" Hightemp Silicone Pipe Boot Gasket

Weight 26 oz
Dimensions 5 × 14.5 × 14.5 in

4” Stainless-Steel Roof Vent

Weight 45 oz
Dimensions 11.5 × 12 × 13 in

Stove Gasket Cement

Weight 5 oz
Dimensions 8 × 2 × 1.5 in

Share your thoughts!

5 out of 5 stars

1 review

Let us know what you think...

What others are saying

  1. Mariah Zeisberg

    Mariah Zeisberg (verified owner)

    Wonderful products, with even more friendly & helpful customer service! this is exactly the kind of company I love to
    support. it’s obvious they love what they do & care about those they are helping. these are the safest & most cost-effective
    flue products for small stoves/spaces I could find & I’m so grateful to have found them. installation was easy for a beginner & they
    were available for assistance when needed. I’ll happily be sending more people your way. thanks so much tiny & crew.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Continue as a Guest

Close
Scroll to Top