5” TINY HOUSE Small Stove Installation Kit – Wall Exit BUNDLE – ALL INSULATED

$792.00

For some installations a wall exit makes the most sense. This 5″ kit comes with the parts necessary to exit through your wall.  This version is for flue systems using all insulated pipe with a Dwarf Stove, so all single-wall pieces are omitted.

You will need additional double-wall pipe to complete your installation. We strongly recommend reviewing your design with us by emailing support@tinywoodstove.com before ordering this item.

5″ Insulated Stainless-Steel Flue Pipe

10"

5" Wall Thimble

$95.00

In stock (can be backordered)

5" Tee Support Bracket

$155.00

In stock (can be backordered)

5" Insulated Tee + Cap

$160.00

In stock (can be backordered)

5" Adjustable Wall Support Bracket

$45.00

In stock (can be backordered)

5” Shielded Roof Vent

$120.00

In stock (can be backordered)

5” Double-Wall Pipe Clamp × 5

$24.00 each

In stock (can be backordered)

Stove Gasket Cement

Used to attach the first section of stovepipe to the flue flange.

$10.00

High Heat Silicone Sealant

Used to create a watertight seal between the thimble and the insulated pipe.

$12.00

5” Single to Double Adapter

This adapter allows you to step up from our 5" single wall pipe to 5" double wall insulated pipe. Made from the same high quality stainless-steel as the flue pipes.

Don’t forget clamps! Every pipe joint needs to be secured with either a clamp or three stovepipe screws. We recommend ordering a pipe clamp along with each section of flue pipe. The 5" Single to Double Adapter will use a Single Wall Pipe Clamp on the bottom and a Double Wall Pipe Clamp on the top.

In stock (can be backordered)

SKU: 5"THWallKit-ALL-INSULATED Categories: ,

This kit is for venting 5” stoves (like our Dwarf 5kw Small Wood Stove) out the wall of tiny houses, sheds or small cabins.

 

Note: Since every installation is a little bit different you will need additional single wall pipe and additional double-wall pipe to complete your installation. The kits components gets you everything you need to exit the wall minus the single-wall runs of pipe inside the structure and the double wall insulated runs of pipe outside the structure.  Use our flue parts calculator to help figure out how much extra pipe you need in addition to the kit.

If you need assistance with calculating how much pipe you need contact us with your plans and the dimension of your space.

 

⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.  For more information, visit www.P65Warnings.ca.gov.

 

Weight 1 oz

5″ Insulated Stainless-Steel Flue Pipe

Weight .25 oz
Dimensions N/A
Length

10"

5" Wall Thimble

Weight 64 oz
Dimensions 7 × 14.5 × 14.5 in

5" Tee Support Bracket

Weight 160 oz
Dimensions 11 × 14 × 16 in

5" Insulated Tee + Cap

Weight 131 oz
Dimensions 8 × 11 × 21 in

5" Adjustable Wall Support Bracket

Weight 35 oz
Dimensions 2.5 × 8 × 11 in

5” Shielded Roof Vent

Weight 51 oz
Dimensions 11 × 12 × 13 in

5” Double-Wall Pipe Clamp

Weight 8 oz
Dimensions 3.5 × 7.5 × 7.5 in

Stove Gasket Cement

Weight 5 oz
Dimensions 8 × 2 × 1.5 in

High Heat Silicone Sealant

Weight 5 oz
Dimensions 8 × 2 × 1.5 in

5” Single to Double Adapter

Weight 28 oz
Dimensions 8 × 8 × 8 in

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Continue as a Guest

Close
Scroll to Top