This kit is for venting 5” stoves (like our Dwarf 5kw Small Wood Stove) out the roof of RV’s, travel trailers and buses.
Since every installation is a little bit different you will need additional single wall pipe and may need additional double-wall pipe to complete your installation. Use our flue parts calculator to help figure out how much extra pipe you need in addition to the kit.
⚠ Warning: California Proposition 65
Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Tiny Wood Stove Staff Elizabeth Paashaus –
Which 5" stove did you install? Dwarf 5kW
We have been using our Dwarf 5kw stove for the last 3 winters and it has been just perfect! Nick and Dan were very helpful when we were designing the flue. We had to offset ours using two 45 degree elbows and they helped ensure we got all the parts we needed. We got the installation kit which included all the pieces that I wouldn’t have known we needed plus we got the elbows and some additional pipe. Cutting a giant hole in the roof was scary but everything worked smoothly and we had it sealed back up within the same day and haven’t had a leak since. We installed the roof support bracket on the top of our roof, under the pipe boot and had to cut down the L brackets to make them fit under. After 3 years we have had no problems, the stove drafts very well, and we find that even with burning less than ideal wood (lots of pine that may not be fully dried as well as cardboard and other paper trash), we only need to clean our flue twice a year.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal