5” TINY HOUSE Small Stove Installation Kit – METAL Roof Exit BUNDLE

$710.00

A roof installation is the easiest, cheapest, and most efficient flue configuration for wood stoves. This 5″ kit comes with the parts you will need to safely get through the metal or rubber roof of your tiny house, shed, or small cabin.  Most installs will require a bit more pipe than the 53″ to 58″ of vertical pipe included in the kit. Run your installation measurements through our Flue Parts Calculator to make sure you’ve got everything you need or contact us with any questions. If you have a shingle roof, use the 5″ Tiny House Shingle Roof Kit instead.

Inventory Alert: We have sold out of the 5″ Double Wall Pipe Clamps and Storm Collar that are included in the installation kit. To help you complete your installation before winter, we will be shipping the rest of your components now and will send along the pipe clamps and storm collar in January when we get them back in stock. In the meantime, you can use 3 stovepipe screws to secure each joint (not included in the kit). If you’d prefer we wait and ship everything together, or if you want to remove the clamps/collar from your order, include a note on your order or contact us at support@tinywoodstove.com.

5” Single-Wall Telescoping Stove Pipe

$65.00

In stock (can be backordered)

5” Single to Double Adapter

$50.00

In stock (can be backordered)

5″ Insulated Stainless-Steel Flue Pipe

40"

5" Interior Trim Plate

$40.00

In stock (can be backordered)

5” Roof Support Mounting Bracket

$80.00

In stock (can be backordered)

6"- 11" Hightemp Silicone Pipe Boot Gasket

$70.00

In stock

5" Storm Collar

$35.00

Available on backorder

5” Shielded Roof Vent

$120.00

Available on backorder

5” Single-Wall Pipe Clamp

$22.00

In stock

5” Double-Wall Pipe Clamp × 2

$24.00 each

Available on backorder

Stove Gasket Cement

$10.00

Available on backorder

SKU: 5"THMetalRoofKit Categories: ,

This kit is for venting 5” stoves (like our Dwarf 5kw Small Wood Stove) through a metal or rubber roof of a tiny house, shed or small cabin.  If you have a shingle or tile roof, use the 5″ shingle roof kit instead.

Note: Since every installation is a little bit different you will need additional single wall pipe and may need additional double-wall pipe to complete your installation. Use our flue parts calculator to help figure out how much extra pipe you need in addition to the kit.

Code for residential installation says, “ 3 ft minimum from roof penetration and 2 ft minimum above highest point of anything within 10 ft.”

 

⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.  For more information, visit www.P65Warnings.ca.gov.

 

Weight 1 oz

5” Single-Wall Telescoping Stove Pipe

Weight 40 oz
Dimensions 6 × 6 × 15 in

5” Single to Double Adapter

Weight 28 oz
Dimensions 8 × 8 × 8 in

5″ Insulated Stainless-Steel Flue Pipe

Weight .25 oz
Dimensions N/A
Length

40"

5" Interior Trim Plate

Weight 25 oz
Dimensions .5 × 12.5 × 18.5 in

5” Roof Support Mounting Bracket

Weight 60 oz
Dimensions 7 × 9.5 × 9.5 in

6"- 11" Hightemp Silicone Pipe Boot Gasket

Weight 26 oz
Dimensions 5 × 14.5 × 14.5 in

5" Storm Collar

Weight 12 oz
Dimensions 2.5 × 13 × 13 in

5” Shielded Roof Vent

Weight 51 oz
Dimensions 11 × 12 × 13 in

5” Single-Wall Pipe Clamp

Weight 6 oz
Dimensions 4 × 5 × 5 in

5” Double-Wall Pipe Clamp

Weight 8 oz
Dimensions 3.5 × 7.5 × 7.5 in

Stove Gasket Cement

Weight 5 oz
Dimensions 8 × 2 × 1.5 in

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Continue as a Guest

Close
Scroll to Top