$35.00
This is a great cap for mobile/marine use or seasonal storage. Simply remove the detachable chimney parts above the roof/deck and replace with this cap. The cap will keep wind, water, and insects out of your flue system, and when secured with a double-wall clamp, will stay in place while traveling. This cap fits our 3″ insulated pipe (5″ outer diameter).
Availability: Available on backorder. ETA July 2021 (21PA)
Made of 0.44 mm (22 gauge) stainless steel. Comes in a mirror finish. Fits our 3″ insulated pipe (5″ outer diameter).
⚠ Warning: California Proposition 65
Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
| Weight | 8 oz |
|---|---|
| Dimensions | 4 × 6 × 6 in |
Question
Stephen P Bryson –
Can this cap fit on the Cubic mini 5″ over insulation pipe for my 3″ cubic mini flue pipe?
(0) (0) Watch Unwatch
Dan –
Stephen- Yes, the top male end of the Cubic Mini insulated pipe kit will fit inside of our 3″ driving cap, which is designed for a standard 5″ outer diameter pipe. While the Cubic Mini 3″ double-wall pipe (used for connector pipe and the inner wall of the insulated kit) is an odd size slightly smaller than standard 3″, the outer wall of their insulated kits is standard 5″ diameter.
(0) (0)