, , ,

Stove Pipe Heat Shield


Our stove pipe heat shield provides over 180 degrees of air-cooled coverage to safely reduce clearances around your single-wall stovepipe without sacrificing heat transfer efficiency.

Available to fit our 3″, 4″, or 5″ diameter stovepipe. Each shield is 32 inches long and can be cut to size. Multiple shields can be overlapped to build a longer continuous shield. Pairs well with our Dwarf Heat Shield Kit to build a complete wood stove clearance reduction system.

Air-cooled heat shields are one of the most popular tools for safely fitting a wood stove in a small space.  These air-cooled heat shields are built from the same black painted 0.64 mm (22 gauge) carbon steel as our single-wall stovepipe. When installed with the included 1″ standoffs between the stove pipe and a combustible surface, this shield design meets the NFPA-211 specifications for an air-cooled heat shield to reduce wall clearances by up to 2/3, or ceiling clearances by up to 1/2.

Each shield is 32 inches long, and includes six heavy-duty heat-safe screws and 1 inch spacers for mounting directly to your single-wall stovepipe. Shields can be cut to size, and multiple shields can be overlapped to build a longer continuous shield.

Because of the upward convection current created by a vertical pipe-mounted heat shield, we recommend converting to insulated pipe no less than 10 inches away from the ceiling when using this product in a vertical orientation.


⚠ Warning: California Proposition 65

Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.



Continue as a Guest

Scroll to Top