Fits Pipe Outside Diameter: 6″ – 11″
Base Dimensions 14″ x 14″
Features a flexible aluminum base for forming boot to fit over corrugated roofs.
Boot is sealed (any sealer that is recommended for silicone + your roof surface) then screwed to roof surface.
This pipe boot is best used with our 4″ & 5″ Insulated Pipe. Our smaller round pipe boot will work with 4″ insulated pipe depending on your roof pitch. This boot gives 4″ pipe more space for steeper pitched roofs.
Pitch Limitations:
4″ Insulated Pipe: 7/12 with 2″ clearance, 7/12 with zero clearance – limitation due to boot’s inability to bend at steeper angles
5″ Insulated Pipe: 2/12 with 2″ clearance, 7/12 with zero clearance
Any combustible materials must be removed to 2″ away from the insulated pipe passing through the roof. A non-combustible roof (e.g. a metal roof with no wood sheathing underneath) can be cut closer to the pipe, but not touching.
For more steeply pitched roofs, check out the Extreme Angle Pipe Boot.
⚠ Warning: California Proposition 65
Use of this product can expose you to chemicals including soot, creosote, wood dust, and wood smoke containing carbon monoxide, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
brett (verified owner) –
This boot is one of the few available in silicone in a really nice gray color. I have a moss green yurt with grey accents and a white roof. This boot worked perfectly to seal the opening as well as keeping with a clean look. It made a super tight seal around my double wall pipe exiting out the wall and I was able to use a series of bolts and weather sealant around the edge to made a really tight fit through the wall. This not only looks great but also probably saved me quite a bit of time.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal